UM EN AXL E SYS INST
16 / 58
PHOENIX CONTACT
2.7
For your safety
2.7.1
Intended use
The Axioline E devices are designed for use as specified in this user manual and in the
device-specific data sheets.
Observe the data specified in the data sheets and in the user manual. If the operating in-
structions and safety notes for configuration, installation, and operation given in the docu-
mentation are followed, the devices should not normally present a danger to people
or property.
2.7.2
Rulations
During device configuration, installation, startup, and maintenance, the applicable safety
and accident prevention rulations for the specific application must be observed.
2.7.3
Safety notes
NOTE: Device damage
To ensure IP65/IP67 protection, seal unused connections with protective caps.
NOTE: Data corruption or loss
Ground the devices to provide immunity to interference.
NOTE: Device damage
Only operate the Axioline E devices with a maximum SELV of 30 V according to
IEC 60950/EN 60950/VDE 0805.
8395_en_03