Set Up The Pump For A New Patient - Smiths Medical CADD-Solis Quick Reference Manual

Set up the pump for a new patient

Ensure you have the pump, a fresh set of 4 AA batteries, a
filled medication cassette (or administration set and fluid
bag). You also need to know the keyboard access code for the
pump, or have the pump key.
1. Insert batteries and press the power switch to turn pump on.
Do you want to start a new patient? Press
2.
3. Choose a Therapy and press S Qualifier and press S a
Drug and press S
4. Unlock the keypad.
5. Are these correct? Verify the chosen protocol and press
Review pump settings. Press
6.
7. Carefully check the patient specific parameters. Press
Value on each parameter, or press S to change.
8. When you have finished the review, press
Cassette not attached. Attach cassette before starting pump.
9.
Attach, latch and lock cassette to the pump.
Prime Tubing? Press
10.
when complete.
Continue Priming? Press
11.
Start Pump? Press
12.
the patient, and are ready to start the infusion.
Review.
Prime. Press
No.
Yes when you have connected the tubing to
Yes.
Next to continue.
Stop Priming
Yes.
Accept