Remote 011 Filter (Optional); Block Heater (Optional) - Westerbeke 29.0 EGED 60Hz Operator's Manual

REMOTE OIL FILTER
(OPTIONAL)
PN:054372
APPLY A THIN COAT OF CLEAN OIL TO THE O·RING WHEN
INSTALLING THIS KIT. THREAD THE KIT ON, THEN HAND
TIGHTEN AN AODITIONAl3/4 TURN AFTER THE 0-RING
CONTACTS
THE BASE. . .
THE "OUT" CONNECTION HOSE
MUST ATTACH TO THE "IN"
CONNECTION AT THE
REMOTE OIL FILTER.
INSTALLATION
NOTE; The
"ln
nand "out" ma1*im1s~
on the kit (if the hoses are
n:muvo:••.:.•
for /nstallationJ
so
they can be
~conndCt&d
correctly.
This popular accessory 'is. used to relocate the engine's oil fil-
ter from the engine to a more convenient location such as an
engine room bulkhead. · ·
NOTE: Refer to ENGINE OIL CHANGE in this manual for
in.Structions on removing the oil filter.
To install, simply remove the engine oil filter and thread on
WESTBRBEKE's remote oil filter kit as shown. Always -
install. this
kit
with the oil filter facing down as illustrated.
Contact your WESTERBEKE dealer for more information.
APPLY A THIN COAT OF CLEAN OIL TO THE
FILTER GASKET WHEN INSTAlLING. AFTER THE
FILTER CONTACTS THE BASE.
tighten It firmly by hand ·
A
CAUTION:
It is vital to install the oil lines
cori'Bctly.,Jf the oil flows in the reverse direction, the
by-pass valve in the filter asembly will prevent the oil
from reaching the engine, causing an intemal engine
failure. If there is no oil pressure reading, shutdown
immediately and check the hose connections.
'(OPTIONAL) BLOCK HEATER
PN:055667 (120V)
DESCRIPTION
A Block Heater can be installed in the engine block in place of
the Block Drain plug which is located on the side of the engine
block next to the side oil fill. The Block Heater
kits
include the
power cord and contain items needed to install the heater
with
illustrated instructions.
Contact your
WESTERBEKE DEALER
for more information ..
NOTE: The Block Heater must always be immersed in coolant
and the Block Heater can not be operated with the engine
rnnning.
(REMOVE TO INSERT
BLOCK HEATER)
PN:055668 (240V)
v
.
· ·ADAPTER
~
PN:055666
.~})).W
.
BLOCK HEATER KIT 240V
PN:055668
INCLUDES A 6'(1.83M)
POWER CORD WITH A
SCHUKA PLUG (CEE 7/7 230V)
BLOCK HEATER KIT 120V
PN:055669 WITH
POWER CORD
fY.T{WESTERBEKE.
Enaines & Generators
30