Remote Oil Filter; Remote Stop/Start Panel - Westerbeke 8.0KW-60Hz Service Manual

REMOTE OIL FILTER (OPTIONAL)
INSTALLATION
. frhls
popular accessory is
used
to relocate the engine's oil fil-
ter from the engine
to
a more convenient location such as an
~ngine
room bulkhead. .
flOTE:
Refer to ENGINE OIL CHANGE
in this numualfor
lnatructions on removing the oil
filter. -
~ instaJJ,'simPIY
remove the engine oil filrer and thread on
1ERBEEB's remote oil filrer kit as shown. JUways
nstsll this kit
with the
nil filrer facing
down as illustrated.
Contact your·WES1ERBEEB dealer for more infoxmation.
JU' P LY A miN &,OAT OF CLEAN DlL TO THE 0-IIING WHEN
INSTAWNB
iHfs
KIT. ntHfADlHE KIT ON, THEN KAND
liGHTEN AN ADDmONAL 3/41URH AFTER THE Q·RING
CONTACTSTHEBASE.
NOTE: Westerbehe is not responsihlefor engiM failure due to
incorrect installation
0/
the Remote Oil Filter.
A
CAQTlDN:
It Is vital to Install the on Ones cor-
rectly. If 'he 011 flows In the reverse direction, the by· .
pass valve in the tilter assembly will prevent the oil
flom reaching the engine cal/slng an Intemal engine
failure. If there Is no 011 pressure reading, shutdown.
Immediptelyand check the hose connections.
APPLY A THIN COAT OF CLfMJ OIL
m
lllE filTER
liASKETWHEN INSTAWNG. AFJER mE FILTER
CQ,NTACTS THE IIAS~! l1B1ITEtl1T AN ADDmONAL·
REMOTE STOP/START PANEL
AND EXTENSION HARNESSES
DESCRIPTION
A remote panel is availaple that allows the generator
to
be .
stopped and started from any location oli the boat. 'The
connecting harnesses come in three different lengths and two
of these can be
CO)llbined
fur a maximum run at 75' (22.17M).
NOTE: For additional in/onnation, contact your local
. eWESTERBEKB dealer.
3·1/'"
"2.!'5MI~I·
REMOTEPANEl)PIG
PN 052560
CONNECTING EXTENSION
. CABLES·
15' (4.75M)
30' (9.1M)
60' (18.2M)
PN 052959
PN 052789
PN 052960
TheS<! two dimensions are the measurement of the cut-out opening.
Engine~
& GeneratDls
84
)