Siemens SIMATIC NET S7-400 Manual page 60

Approvals
Applied standard:
● EN 50581:2012
c(UL)us
Applied standards:
● Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment)
● Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
Report / UL file: E85972 (NRAG, NRAG7)
cULus Hazardous (Classified) Locations
Underwriters Laboratories, Inc.: cULus IND. CONT. EQ. FOR HAZ. LOC.
Applied standards:
● ANSI ISA 12.12.01
● CSA C22.2 No. 213-M1987
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4
● Cl. 1, Zone 2, GP. IIC T4
Ta: Refer to the temperature class on the type plate of the CP
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the CP according to the section Notices on
use in hazardous areas according to UL HazLoc (Page 33).
FM
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4
Ta: Refer to the temperature class on the type plate of the CP
Certificate of Compliance: 3030463
Australia - RCM
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
Notice for Canada
This class A digital device meets the requirements of the Canadian standard ICES-003.
60
CP 443-1 RNA
Manual, 03/2019, C79000-G8976-C299-04