Daytime Running Lights (Drl) - If Equipped; High Beams - Fiat 500X 2019 Owner's Manual

56 GETTING TO KNOW YOUR VEHICLE
Headlight Switch
1 — Rotate Headlight Switch
2 — Ambient Light Dimmer
3 — Instrument Panel Dimmer
4 — Push Fog Light Switch
Turning on the headlights will illuminate the instrument
cluster and the controls located on the instrument panel.
Daytime Running Lights (DRL) — If Equipped
The Daytime Running Lights (DRLs), if enabled by the
Uconnect settings, will turn on when the key is placed in
the RUN position and the park brake is not applied.
The DRLs will be disabled during turn signal operation
and resume operation when the turn signal operation has
ended.

High Beams

To turn on the high beam headlights, push the turn signal
lever forward (toward the front of the vehicle) and an
indicator will illuminate in the cluster. To turn off the high
beams, pull the turn signal lever rearward (toward the rear
of the vehicle).
High Beam And Turn Signal Controls
NOTE: The headlights must be on for the high beams to
activate.