Table of Contents
Advertisement
NOTE:
The external lights can only be turned on with the
ignition in the MAR (ACC/ON/RUN) position.
Turn Signal/Lights Lever
1 — Turn Signals
2 — High Beams
3 — Flash-To-Pass
4 — Headlights
Rotate the end of the multifunction lever upward
to the first detent for headlight operation.
18
NOTE:
When the headlights are turned on, the Daytime
Running Lights will be deactivated.
Daytime Running Lights — If Equipped
To activate the Daytime Running Lights (DRL),
rotate the end of the multifunction lever to the
O symbol.
NOTE:
The low beams and side/tail lights will not be on
with DRL.
The DRL function can be turned on or off
through the touchscreen. Refer to "Uconnect
Settings" in "Multimedia" in your Owner' s Manual
for further information.
High Beams
With the low beams activated, push the multi-
function lever forward (toward the front of the
vehicle) to turn on the high beams.The lever will
remain forward in a fixed position and the telltale
will illuminate in the instrument cluster display.
Pull the multifunction lever rearward (toward the
rear of the vehicle) to turn off the high beams.
Flash-To-Pass
You can signal another vehicle with your head-
lights by lightly pulling the multifunction lever
toward you. This will cause the high beam head-
lights to turn on, and remain on, until the lever is
released.
Parking Lights
To turn on the parking lights, remove the key or
turn the ignition to STOP (OFF/LOCK) position
and turn on the headlights.
NOTE:
If the parking lights are left on and the key is in
the stop position with the door open, an audible
chime will sound and a message will show in the
instrument cluster display. The chime will stop as
soon as the door is closed or the lights are
switched off.
Follow Me Home/Headlight Delay
When this feature is selected, the driver can
choose to have the headlights remain on for a
preset period of time after the engine is turned
OFF.
Advertisement
Table of Contents
