White Indicator Lights; Blue Indicator Lights - Fiat 500X 2019 Owner's Manual

— Stop/Start Active Indicator Light —
If Equipped
This indicator light will illuminate when the Stop/Start
function is in "Autostop" mode.

White Indicator Lights

— LaneSense Indicator Light — If Equipped
When the LaneSense system is ON, but not armed, the
LaneSense indicator light illuminates solid white. This
occurs when only left, right, or neither lane line has been
detected. If a single lane line is detected, the system is
ready to provide only visual warnings if an unintentional
lane departure occurs on the detected lane line.
Refer to "LaneSense — If Equipped in "Starting And
Operating" for further information.
— Light Sensor Failure
This light illuminates when there is light sensor failure. If
this light illuminates, have an authorized dealer inspect it.
— Speed Warning Indicator Light — If Equipped
When Set Speed Warning is turned on, the speed warning
telltale will illuminate in the instrument cluster with a
number matching the set speed. When the set speed is
GETTING TO KNOW YOUR INSTRUMENT PANEL 131
exceeded, a single chime will sound along with pop up
message of "Speed Warning Exceeded." Speed Warning
can be turned on and off in the instrument cluster display,
for further information refer to "Instrument Cluster Dis-
play Menu Items" in "Getting To Know Your Instrument
Panel."
The number "55" is only an example of a speed that can be
set.

Blue Indicator Lights

— High Beam Indicator Light
This indicator light will illuminate to indicate that the high
beam headlights are on. With the low beams activated,
push the multifunction lever forward (toward the front of
the vehicle) to turn on the high beams. Pull the multifunc-
tion lever rearward (toward the rear of the vehicle) to turn
off the high beams. If the high beams are off, pull the lever
toward you for a temporary high beam on, flash to pass
scenario.
4