Gira DALI Gateway Product Documentation page 98

"DALI Gateway C00CX2 EN / C00CX4 EN" software
Functional description
Assign one or several available DALI devices to the group.
The assigned devices will be removed from the list box in the left subwindow and will appear for the
selected group in the right window (cf. figure 43).
Figure 43: Assigning a device to a group
If applicable, select another group from the right subwindow.
All available devices will again become visible in the left subwindow if no assignment has yet been
made for the selected group.
Again, assign one or several available DALI devices to the group.
The assigned devices will be removed from the list box in the left subwindow and will appear for the
selected group in the right window.
In case a device that has already been assigned is to be assigned to another group, the plug-in will
report that the device has already been assigned to another group so that feedbacks of switching
states and brightness values may no longer be distinct. After the message has been confirmed, the
plug-in will make an assignment overlapping the groups. Devices that are assigned to several groups
will be identified in the right subwindow by a " * ".
In this case, the check box " Hide already assigned DALI devices " is disabled and can only be
selected in the further course of the DALI commissioning if all multiple assignments of DALI devices
to groups have been cancelled.
If applicable, proceed with group assignments as described.
In case of the application program of version "0.4" or "1.4", it is possible to select the previously
deleted check box " Hide already assigned DALI devices " anytime during the commissioning unless
there have been assignments of DALI devices to several groups. Selecting the check box will then
prevent a multiple assignment of DALI devices.
Best. Nr. 1060 00 Page 98 of 136