Table of Contents
Advertisement
Groups
Time for the cyclical
transmission of the
feedback telegram
Time delay for feedback
telegram after bus
voltage return
Best. Nr. 1060 00
"DALI Gateway C00CX2 EN / C00CX4 EN" software
00:00:10 ... 23:59:59
[hh:mm:ss]
20 s
00:00 ... 59:59 [mm:ss]
5 s
Depending on the parameterization, all
active feedback telegrams of the Gateway
can transmit their status also cyclically to
the bus.
The "Time for cyclical transmission of
feedback telegram" parameter generally
defines the cycle time for all groups.
Presetting: 20 seconds
To reduce telegram traffic on the bus line
after bus voltage activation (bus reset) or
mains supply activation, after connection of
the device to the bus line or after
programming with the ETS, it is possible to
delay all active feedback telegrams of the
Gateway. In this case the parameter
specifies a delay time for all devices.
Feedback telegrams for bus initialization
will be transmitted to the bus only after the
time parameterized at this point has
elapsed.
Presetting: 5 seconds
The "DALI error status", "DALI short-
circuit" or "DALI voltage failure"
messages will basically be transmitted
without any time delay.
Parameters
Page 114 of 136
Advertisement
Table of Contents
