Gira DALI Gateway Product Documentation page 55

Additional functions
Additional functions can be enabled for each DALI group.. A disable function or, alternatively, a forced-
control position function can be configured to serve as an additional function. Only one of these
functions can be enabled for an group.
These additional functions are enabled and parameterized in the "Group - [x] group name" parameter
node (x = group number 1...32).
Setting the disable function as an additional function
The KNX/EIB control of the groups will be overridden and locked in case of an active disable. The
override feature can, for example, also be used to implement a permanent lighting function.
Object
"Disable"
*
Staircase timer
Object
function
"staircase timer
(timing)
function start/stop"
*
Polarity of
Object
"Central function" central object
Object
Time functions
"Switching"
Object
"Dimming"
Object
"Brightness value"
*
Scene
Object
control
"Extension unit"
Object
*
"Brightness value
feedback"
Verzögerung nach
Busspannungswiederkehr
Object
*
"Switching
feedback"
Set the "Type of additional function" parameter in the "Groups - [x] group name" parameter node (x =
group number 1...32) to "Disable function".
The disable function has now been enabled. The "Disable" communication object and the
parameters of the disable function become visible.
Set the "Polarity of disable object" parameter in the "Groups - [x] group name" in the parameter node
to the desired polarity.
Best. Nr. 1060 00
"DALI Gateway C00CX2 EN / C00CX4 EN" software
*
*
* *
Soft-ON / OFF
automatic
Dimming speed /
shutoff function
Dimming behaviour
recall
*
storing **
* *
zyklisches Senden
Fig. 14 : Functional diagram of the disable function
Behaviour
- bus voltage failure
Disable function
- bus voltage return
- ETS programming
lower
higher
Scene priority
*
Functional description
*
Group
Blinking
* = optional parameterization
** = Basically, no new scene value will
be stored if a disable or forced-control
position is active!
Page 55 of 136