Programming Physical Address And Application Software - Gira 5201 00 Manual

5.3. Programming the physical address and application software
The alarm control unit Connect has been connected and is ready for operation. The bus is powered.
Programming is done in the programming environment of the ETS 5. Connection to the device will be
through IP.
Notes
• You can only program the physical address and application software when the housing cover is
open.
Important: When you open the housing cover, a tamper alarm triggers.
• Use the Gira Project Assistant (version 4 or higher) to start programming mode. The alarm control
unit Connect does not have a programming button or programming LED.
1. Start the GPA and select the project.
2. Double-click the data points tile.
The data points view opens.
Order No. 5201 00
Start-up
Page 19