Parameters; General Information; Main Security Area, Security Area 2, Security Area 3, Security Area 4 - Gira 5201 00 Manual

7. Parameters

The default value for each parameter is marked in bold.
7.1. General
Parameters
Time mode
Display KNX statuses
Main security area
Security area 2
Security area 3
Security area 4

7.2. Main security area, security area 2, security area 3, security area 4

Parameters
Show KNX alarm com-
munication objects
Order No. 5201 00
Entry / Selection
None
Alarm control unit Con-
nect is time client
Checkbox (active)
Checkbox (inactive)
Entry / Selection
Checkbox (inactive)
Remarks
In mode "alarm control unit Connect is time cli-
ent", you can set time and date via the bus. Note
that, in this case, NTP is deactivated.
Only one time server may be assigned to the alarm
control unit.
This option enables the communication objects for
programming mode and bus voltage.
Activating this parameter makes the respective
pages for the corresponding security area and the
communication objects accessible.
Remarks
The communication objects for triggering an alarm
are available.
Parameters
Page 28