Table of Contents
Advertisement
1. About the product
1.1. Product catalogue
Product name:
Order No.:
Application:
Design:
1.2. Application
The alarm control unit Connect is a wireless alarm system and the core unit of the Gira Alarm Connect
security system. The alarm control unit Connect is designed for indoor use to protect apartments, pri-
vate homes and small or medium commercial properties.
Using a KNX IP router, the alarm control unit Connect can be integrated into a KNX installation. A KNX
installation allows use of existing KNX sensors.
• Connects up to 64 wireless components including wireless operating unit, alarm signal units (wire-
less indoor siren, wireless outdoor siren) or wireless I/O module
• 4 security areas
• Encrypted-data access for setting up via Internet and Gira S1/Gira smart home app
• Gira G1 as client for Alarm Connect security system to act as additional operating and display unit
• Connects landline phone for remote alarming (optional: GSM module)
• In the event of mains failure, internal rechargeable battery pack takes over power supply for at least
12 hours
1.3. Device components
1
2
LAN
AMT TEL
A
B
B2
A2
11
10
9
When delivered, the device is in passive mode, i.e. it does not send telegrams through the bus. You
can use ETS, version 5 or higher, and the Gira Project Assistant (GPA), version 4 or higher, to program
and start up the alarm control unit.
IP address is assigned via DHCP. Should the alarm control unit not receive an address using this
method, an auto IP (address range from 169.254.1.0 to 169.254.254.255) is issued after a certain
waiting time.
You can also issue a static IP address via the ETS or the Gira Project Assistant. You can set IP address,
IP subnet mask and IP standard gateway here.
Order No. 5201 00
Alarm control unit Connect
5201 00
Alarm control unit
Surface-mounted
3 4
N
L
N
L
8
7
6
5
1
Connection: telephone
2
Connection: LAN (RJ45)
3
Slot: GSM module
4
Connection: Rechargeable battery pack
5
Connection: AC 230 V
6
Housing cover (open)
7
Plug terminals: Output
8
Plug terminals: Input
9
Rechargeable battery pack
10 Terminal plugs: reserved for future applications
11 Pairing button and status LED
1.4. State of delivery
About the product
Page 3
Advertisement
Table of Contents
