Table of Contents
Advertisement
6.2. Object table
Communication objects: 114
Addresses (max.):
Assignments (max.):
Dynamic
table management:
The alarm control unit Connect offers the following group objects for integrating group addresses:
Object
Name
1
Alarm control unit
Object which returns the state of the device. If the value of the object is "1", the device is ready for
operation. "0" means that the device is not yet ready for operation.
Object
Name
2
Alarm control unit
Object for transmitting the current device state.
00h
Ready
01h
Booting
02h
Shutting down
03h
Configuring
figured.
04h...FFh Reserved
Object
Name
6
Alarm control unit
The alarm control unit Connect is time client. Object for receiving the current date.
Object
Name
7
Alarm control unit
The alarm control unit Connect is time client. Object for receiving the current time.
Object
Name
8
Alarm control unit
Object for transmitting the operating time in seconds. Time since last restart.
Object
Name
50
Alarm control unit
Show KNX alarm communication objects: Active. Object for receiving the programming mode. "1"
means that programming mode is activated, and "0" means that programming mode is deactivated.
Order No. 5201 00
32767
32767
No
Function
Ready
Function
Status
The alarm control unit Connect is ready for operation.
The alarm control unit Connect is booting.
The alarm control unit Connect will reboot.
The alarm control unit Connect is currently being con-
Function
Date
Function
Time
Function
Runtime (s)
Function
Programming
mode
Type
DP type
1 bit
1.011 status
Type
DP type
1 byte
5.010 meter
pulses (0..255)
Type
DP type
3 bytes
11.001 date
Type
DP type
3 bytes
10.001 time of
day
Type
DP type
4 bytes
13.100 time dif-
ference (s)
Type
DP type
1 bit
1.001 switching C, W
Software
Flags
C, R, T
Flags
C, R, T
Flags
C, W
Flags
C, W
Flags
C, R
Flags
Page 22
Advertisement
Table of Contents
