FujiFilm OPC-G1-DEV Manual page 31

(4) AC/DC Drive object (Class 2A hex.)
This object monitors the current speed command settings and the current speed of the inverter, and configures
their related settings. It also monitors the output data issued from the inverter.
Instance Attribute
1 03 hex AtReference
04 hex NetRef
06 hex DriveMode
07 hex SpeedActual
08 hex SpeedRef
09 hex CurrentActual
11 hex OutputVoltage
12 hex AccelTime
13 hex DeccelTime
14 hex LowSpdLimit
15 hex HighSpdLimit
16 hex SpeedScale
17 hex CurrentScale
1B hex VoltageScale
1C hex TimeScale
1D hex RefFromNet
*
"Read-only" while the inverter is running.
Name Description
Speed arrival
Switching speed command
source
Run mode. Fixed at 0.
Speed monitor (r/min)
Speed command (r/min)
Output current
(in units of 0.1 A)
Output voltage (V)
Acceleration time (ms)
Deceleration time (ms)
Lower limit speed (r/min)
Maximum speed (r/min)
Change the speed scale
(r/min) all
calculated below.
r/min
SpeedScale
2
Change the current scale
(0.1 A) all at once, as
calculated below.
0.1 A
CurrentSca le
2
Change the voltage scale (V)
all at once, as calculated
below.
V
VoltageSca le
2
Change the time scale (ms)
all at once, as calculated
below.
ms
TimeScale
2
Current speed command
source
Value (hex.)
00: Stopped or
Accelerating/
decelerating
01: Speed arrival
00: Inverter
01: DeviceNet
00: Unique to vendor
Actual speed
-32768 to 32767 r/min
Output current
Output voltage
0 to 65535 ms
0 to 65535 ms
0 to 32767 r/min
0 to 32767 r/min
-15 to 15
at once, as (Factory default: 0)
-15 to 15
(Factory default: 0)
-15 to 15
(Factory default: 0)
-15 to 15
(Factory default: 0)
00: Inverter
01: DeviceNet
30
R/W Data size
R Byte
R/W Byte
R Byte
R Word
R/W Word
R Word
R Word
R/W Word
R/W Word
R/W Word
R/W * Word
R/W Byte
R/W Byte
R/W Byte
R/W Byte
R Byte