Preface; Safety Precautions - FujiFilm OPC-G1-DEV Manual

Thank you for purchasing our DeviceNet Communications Card OPC-G1-DEV.
Mounting this communications card on your FRENIC-MEGA allows you to connect the FRENIC-MEGA to a
DeviceNet master unit (e.g., PC and PLC) and control it as a slave unit using the run command, speed
command, and access to function codes.
This communications card has the following features:
• Data Rate (baud rate): 125 kbps, 250 kbps, 500 kbps
• I/O Message:
• Applicable Profile:
• Reading and writing all the function codes applicable to the FRENIC-MEGA (I/O Message (User Defined
Assembly Instance or Access to Function Codes Instance) and Explicit Message)
This product has been tested by ODVA authorized Independent Test Lab and found to comply with ODVA's
DeviceNet Conformance Test Version 20.

DeviceNet is a trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
This instruction manual does not contain inverter handling instructions. Read through this instruction manual in
conjunction with the FRENIC-MEGA Instruction Manual and be familiar with proper handling and operation of
this product. Improper handling might result in incorrect operation, a short life, or even a failure of this product.
Keep this manual in a safe place.
Related Publications
Listed below are the other materials related to the use of the DeviceNet communications card "OPC-G1-DEV."
Read them in conjunction with this manual as necessary.
• RS-485 Communication User's Manual)
• FRENIC-MEGA Instruction Manual
The materials are subject to change without notice. Be sure to obtain the latest editions for use.
• Read through this instruction manual and be familiar with the DeviceNet communications card before
proceeding with installation, connections (wiring), operation, or maintenance and inspection.
• Improper handling might result in incorrect operation, a short life, or even a failure of this product as
well as the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this product
is discarded.

Safety precautions

Read this manual thoroughly before proceeding with installation, connections (wiring), operation, or
maintenance and inspection. Ensure you have sound knowledge of the device and familiarize yourself with all
safety information and precautions before proceeding to operate the inverter.
Safety precautions are classified into the following two categories in this manual.
Failure to heed the information contained under the CAUTION title can also result in serious consequences.
These safety precautions are of utmost importance and must be observed at all times.

Preface

Polling and Change of State supported
AC Drive profile
Certification Logo Mark:
Failure to heed the information indicated by this symbol may lead to
dangerous conditions, possibly resulting in death or serious bodily
injuries.
Failure to heed the information indicated by this symbol may lead to
dangerous conditions, possibly resulting in minor or light bodily injuries
and/or substantial property damage.
1