At+Cchstart Start Ssl Service - SimCom SIM7600 Series Command Manual

Write Command
AT+CCHMODE=<mode>
Defined Values
<mode>

2.2.3 AT+CCHSTART Start SSL service

AT+CCHSTART is used to start SSL service by activating PDP context. You must execute AT+CCHSTART
before any other SSL related operations.
AT+CCHSTART Start SSL service
Execute Command
AT+CCHSTART
Maximum Response Time
Defined Values
<err>
SIM7500_SIM7600_SIM7800 Series_SSL_AT Command Manual
OK
Response
a)If successfully:
OK
b)If failed:
ERROR
The mode value:
0 – Normal.
1 – Transparent mode
The default value is 0.
Response
a)If start SSL service successfully:
OK
+CCHSTART: 0
b)If start SSL service successfully:
+CCHSTART: 0
OK
c)If failed:
ERROR
d)If failed:
ERROR
+CCHSTART: <err>
120000ms
The result code, please refer to chapter 2.3.1
Smart Machine Smart Decision
12 / 36