Chapter 7: Snmp Supported Mibs; Snmp Agent Failure Report Trap Contents - Hitachi VSP 5000 Series Notification Manual

Chapter 7: SNMP supported MIBs

You can use the SNMP supported MIBs reference to find information on the standard
and extension MIB specifications, and trap configuration.

SNMP Agent failure report trap contents

A standard extension trap protocol data unit (PDU) includes the product number of the
device that experienced the failure, the device nickname, and a failure reference code. A
failure report trap contains additional information about the failure, such as the area,
date, and time of the failure.
If you obtain the information with the GetRequest command, access the MIB by using
the product number of the device as an index.
The following table shows the failure report trap.
Name
eventTrapSerial
Number
eventTrapNickn
ame
eventTrapREFCO
DE
eventTrapPartsI
D
eventTrapDate
eventTrapTime
eventTrapDescri
ption
Object identifier
.1.3.6.1.4.1.116.5.11.4.2.1
.1.3.6.1.4.1.116.5.11.4.2.2
.1.3.6.1.4.1.116.5.11.4.2.3
.1.3.6.1.4.1.116.5.11.4.2.4
.1.3.6.1.4.1.116.5.11.4.2.5
.1.3.6.1.4.1.116.5.11.4.2.6
.1.3.6.1.4.1.116.5.11.4.2.7
Chapter 7: SNMP supported MIBs
Hitachi Alert Notification Guide for VSP5000 Series
Type Description
INTEGER The product
number of the
device that
experienced the
failure.
DisplayString The device
nickname .
DisplayString The failure
reference code.
OBJECT The area where
IDENTIFIER the failure
occurred.*
DisplayString Failure occurrence
date.
DisplayString Failure occurrence
time.
DisplayString Detailed
information of a
failure.
43