Hitachi VSP 5000 Series Notification Manual page 23

7. To send Syslog data to the alternative server (secondary server), select Enable for
Secondary Server and then specify the following items:
IP Address
■
Port Number
■
Client Certificate File Name, Password, and Root Certificate File Name
■
Specify this setting only when New Syslog Protocol (TLS1.2/RFC5424) is
selected for Transfer Protocol.
8. Specify a name you want for Location Identification Name to identify the storage
system.
9. If New Syslog Protocol (TLS1.2/RFC5424) is selected for Transfer Protocol, specify
the values for Timeout, Retry Interval, and Number of Retries.
10. Click Send Test Message to Syslog Server, if necessary, to test the settings.
11. Confirm that the Syslog server received the log message (detailed data: "RefCode:
7FFFFF, This is Test Report.").
12. Click Finish.
13. Confirm the settings in the Confirm window, and then enter the task name in Task
Name.
14. Click Apply.
The task will be registered. If the check box for Go to tasks window for status is
selected, the Tasks window opens.
Hitachi Alert Notification Guide for VSP5000 Series
Chapter 3: Setting Syslog
Editing Syslog settings
23