Silvercrest SMH 6 A1 Operating Instructions And Safety Instructions page 8

SilverCrest SMH 6 A1
Remove leaking batteries immediately in order to prevent
damage to the mill. You can remove battery fluids with a dry,
absorbent cloth. When doing so, wear suitable gloves! Contact
with your skin must be avoided.
If it comes into contact with the skin or eyes, rinse/wash the
area with plenty of water and seek medical attention.
If a battery is swallowed, you must seek medical attention
immediately.
DANGER! Risk of injury!
 Never open the housing of the mill. There is a risk of injury if
the device is assembled incorrectly. Furthermore, opening the
housing will void your guarantee.
 The mill must not be used if it is damaged. There is a risk of
injury!
 Make sure there are no naked flames (for example, burning
candles) placed on or near the mill. There is a risk of fire!
WARNING! Damage to property
 Never immerse the mill in water or any other liquid. If liquid
enters into the mill, remove the batteries immediately and
contact the service department (see 'Warranty information'
section).
 The mill must not be exposed to direct sources of heat (for
example, heaters), direct sunlight or strong artificial light.
 Make sure that the mill is not exposed to excessive shocks or
vibrations.
6 - English