Changing The Grind Setting; Cleaning; Storing The Device When Not In Use; Troubleshooting - Silvercrest SMH 6 A1 Operating Instructions And Safety Instructions

SilverCrest SMH 6 A1

7.3 Changing the grind setting


Remove the protective cap (7) on the bottom of the container (6).

Turn the adjusting screw (9) anti-clockwise slightly for a coarser grind setting.

Turn the adjusting screw (9) clockwise slightly for a finer grind setting.

Replace the protective cap (7) onto the bottom of the container (6).

8. Cleaning

WARNING of damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a
metal scourer) for cleaning purposes. Otherwise the mill may be damaged.
Do not clean the mill and its accessories in the dishwasher, as this may cause
irreparable damage.
Never immerse the mill in water or any other liquid. No liquid may enter the mill.

Clean the housing of the mill with a soft, damp cloth, using a mild detergent for stubborn stains.

Dry all of the parts thoroughly.

It is not necessary to clean the grinder and the container (6).

9. Storing the device when not in use

If the mill is not going to be used for a longer period of time, store it in a safe, clean and dry place.

Remove the batteries.

Empty the container (6).

Before storing the mill, clean it thoroughly as described in the previous section.

10. Troubleshooting

If the mill does not work as usual, use the following instructions to try and solve the problem. If
working through the following tips does not eliminate the fault, please contact our hotline (see the
'Warranty information' section).

10.1 The mill is not working


The batteries are dead. Please replace the batteries with new ones of the same type. Please
refer to the instructions in the 'Inserting the batteries/filling the mill' section.

The batteries were inserted incorrectly. Please refer to the instructions in the 'Inserting the
batteries/filling the mill' section.
8 - English