Removing The Display Assembly Latch; Lcd Panel - Dell Inspiron 2100 Manual

Removing and Replacing Parts : Dell Inspiron 2100
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read
following procedure.

Removing the Display Assembly Latch

1. Remove the display assembly
2. Lift the display assembly latch off of the display-assembly top cover.
3. Slide the latch spring off of the post on the display-assembly top cover.
You may need to use a small flat-blade screwdriver to separate the latch spring from the
post.
Replacing the Display Assembly Latch
1. Carefully place the latch spring over the post on the display-assembly top cover.
You may need to use a small flat-blade screwdriver to place the spring over the post. Hold
the spring on the post with the screwdriver while performing the next step.
2. Holding the latch, stretch the spring slightly and set the display- assembly latch in place
in the display assembly top cover.
3. Reinstall the bezel.

LCD Panel

file:///F|/Service%20Manuals/Dell/Inspiron/2100/remove.htm (15 of 44) [2/28/2004 6:49:34 AM]
"Preparing to Work Inside Your
bezel. display assembly
Computer" before performing the