Dell Inspiron 2100 Manual page 106

Removing and Replacing Parts : Dell Inspiron 2100
7. Grasp the front door as it bows up while still pressing the door edge with the
screwdriver.
8. Carefully slip the right-edge hinge of the front door off its right hinge pin.
9. Grasping both doors together, carefully slip the left side of each door off their left hinge
pins.
Replacing the APR Docking Doors
NOTICE: On the under side of the doors, a small F is printed on the front door and a
small B is printed on the back door. As you hold the doors for installation, the front door
is near you, the back door is away from you, and the tension spring is to the left.
1. Turn the computer upside down.
The docking connector door opening should be at the top.
2. Holding the two doors together at their right edges, insert the left hinges of the doors (at
the end with the tension spring) onto the left, front, and back hinge pins.
3. Carefully bow the doors in the center.
4. Slip the right hinge of the back door on to the right, back hinge pin.
5. Slip the right hinge of the front door on to the right, front hinge pin.
6. Release the doors so that they set into place.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/2100/remove.htm (44 of 44) [2/28/2004 6:49:35 AM]