Psystem; Configuration Cloning (Backup Tab); Cloning Psteps In A Nutshell - Lightware HDBaseT HDMI-TPS-RX110AY-Plus User Manual


  
5. PSoftware Control - Lightware Device Controller
5.9.5. System
Three functions are available under PSystem tab:
▪ Download system log - saving the file of the device.
Load factory defaults - recalling factory defaults settings and values. All factory default settings are
▪
listed in the Factory Default Settings
▪ Reboot - rebooting the system.
#log_ldc #systemlog_ldc #factory_ldc #restart_ldc #reboot_ldc
System tab in Settings menu
section.
Applied firmware package: v1.3.1
HDM
-TIPS-TX110AY series – User's Manual
5.10. Configuration Cloning (Backup Tab)
The configuration cloning of Lightware LW3 devices is a simple method that eliminates the need to repeatedly
configure certain devices to have identical (non-factory) settings.
f the devices are installed in the same
type of system multiple times then it is enough to set up only one device to fit the user's needs and then copy
those settings to the others, thus saving time and resources.
5.10.1. Cloning Steps in a Nutshell

nstalling multiple devices with the same customized configuration settings can be done in a few easy steps:
Step 1. Configure one device with all your desired settings with the LDC software.
Step 2. Backup the full configuration file to your computer.
Step 3.
f needed, make some modifications to the configuration file using a text editor (e.g. Notepad). D.g.
modifying the static IP address is needed when DHCP is not used.
Step 4. Connect to the other device which has to be configured and upload (restore) your configuration file.
Step 5. Done! You can have as many totally identical, customized devices as you like.
#backup_ldc #configurationcloning_ldc
LDC software: v1.33.0b5 LDU2 software: v2.0.0b22
Backup tab
41