Flash Exposure Compensation; Changing Other Settings; Color Space - Sigma FP User Manual

CAUTION
The Flash Mode cannot be set if a flash is not attached to the camera, or

the flash is turned off.

FLASH EXPOSURE COMPENSATION

It is possible to compensate the flash output level without changing the
background's exposure.
To set the Flash Exposure Compensation, select [
[Flash Exposure Compensation].
CAUTION
The flash exposure compensation can not be set if the flashgun is not

attached to the camera, or the flashgun is turned off.
The flash exposure compensation will not disable automatically. After

taking the picture, set the compensation value to ±0.0 by above
procedure.

CHANGING OTHER SETTINGS

This section describes other settings that can be configured in the items of
[ / SHOOT].

COLOR SPACE

(STILL)
It is possible to select sRGB, which is a common color space or Adobe RGB,
which is mainly used for commercial printing, and other industrial purposes.
Select the desired compensation value by using the
buttons.
Exposure compensation can be set in 1/3 stop

increments from +3.0 to -3.0 stops.
When the setting is completed, the setting icon and
compensation value are displayed.
SHOOT] → [Flash] →
107