Sigma FP User Manual page 64

CAUTION
The following functions or settings cannot be used in combination.

HDR, Focus BKT, Fill Light BKT, Electronic Stabilization, Fill Light,
ISO sensitivity settings added with the [Composite Low ISO Expansion]
The maximum number of frames and speed of continuous shooting are

as follows: (The upper rows show the maximum number of frames, the
lower rows show the maximum shooting speed in continuous mode
(frames per second)).
Continuous
(High Speed)
Continuous
(Medium Speed)
Continuous
(Low Speed)
SELF TIMER
Self Timer 2 sec
The shutter will be released 2 seconds after the shutter button is fully
depressed.
Self Timer 10 sec
The shutter will be released 10 seconds after the shutter button is fully
depressed.
After composing the picture, press the shutter button "half-way" and adjust
the focusing. Then, press the shutter button the rest of the way and the
self-timer will activate. During the self-timer operation you will hear an
electronic beeping sound. The beeping sound will be much faster during the
last two seconds, before the shutter is released.
SYSTEM] → [Electronic Sounds] → [Timer Volume] menu
When [

is set to [0], the electronic sound will not beep even if the self-timer is
operated.
64
Image Size
12
12
12
12
18
12
5
12
3
24
24
24