Sigma FP User Manual page 37

For example, to change the image quality to DNG
3
Rotate the Front Dial or the Rear Dial to display [DNG].
4
Press the button or half-press the shutter button to return to the
shooting mode.
TIP
It may be possible to make more detailed settings depending on items or
options. In such a case, "
AEL button to configure the desired settings as needed.
CAUTION
Items that you cannot set are grayed out, and the options cannot be

changed by rotating the dials.
You can change the items to be allocated to the QS menu.
[ SYSTEM ] → [Custom QS]
3
When you have finished setting the allocation, press the
close the [Custom QS] screen.
1
Press the QS button to display the Quick
Set Menu.
2
Press the buttons to select the item
related to image quality (
Further Options" is displayed. Press the
1
Press the
QS] screen to select the position you want
to reallocate, and press the
apply the setting.
2
From the list at the bottom of the screen,
select the items you want to allocate by
pressing the
button to confirm your selection.
).
buttons on the [Custom
buttons, and press the
button to
button to
37