Sigma FP User Manual page 129

5
Specify a still image frame. (Use the
the button. In the same way, temporarily stop the movie to be still image
in the target frame, and press the
If you press the AEL button during Pause mode, the movie returns to the

starting frame.
If you press the AEL button during playback, the movie returns to the

starting frame, and stops temporarily.
A still image frame can also be specified outside the starting or ending

frame if it is included in the same file.
BRUSH WORK
Most of brush work is performed on the touch panel.
To perform brush work, you can double-tap or pinch out to enlarge the

target image. Dragging it with two fingers during zoom-in allows you to
move the displayed area.
Touching

Touching

Touching

Touching

You can use the AEL button to check the effect while working.

You can use the AEL button to switch the display/non-display of the

guide at the top.
6
Specify the range to move an image in the
specified still image frame. Use the
button to select
button. Trace the range to move an image
with your finger on the touch panel to
unmask it (brush work).
returns the work.
redoes the returned work.
masks the part traced with your finger.
unmasks the part traced with your finger.

button to select
button.)
Touching shifts to the [Brush Options]
screen. While viewing the preview screen
on the right, drag [Size], [Hardness], or
[Mask Color] to make adjustments.
, and press
, and press the
129