Table of Contents
Advertisement
FLASH EXPOSURE COMPENSATION
It is possible to compensate the flash output level without changing
the background's exposure.
The Flash Exposure Compensation can be set from [
Settings] (P.28) → [Flash] → [Flash Exposure Compensation].
Select the desired compensation value by using the
● Flash Exposure compensation can be set in 1/3 stop increments from
+3.0 to -3.0 stops.
CAUTION!!
The flash exposure compensation can not be set if the flashgun is
not attached to the camera, or the flashgun is turned off.
The flash exposure compensation will not disable automatically.
After taking the picture, set the compensation value to ±0.0 by
above procedure.
83
● When the Flash Exposure Compensation is set,
the icon and compensation value will be
displayed on the left of the LCD monitor.
Capture
buttons.
Advertisement
Table of Contents
