Sigma FP User Manual page 98

2
Press the button to select [On], and press the
Further Options screen. (If you press the
shooting is performed with the previous setting value.)
3
Select the option you want to change on the Further Options screen. Then,
press the button or the
EXPOSURE BKT
By setting the exposure judged as appropriate by the camera, it is possible
to continuously take pictures with the exposure bracketed.
Bracketing
Number
Bracketing
Amount
Bracketing
Order
4
Use the buttons to select a desired value, and press the
the button to apply the setting.
The operations in each Drive Mode are shown below.

Single Capture
Continuous
Self Timer
98
button to open the sub menu.
Number of shots (three or five)
Up to ±3 steps in 1/3-step increments
-
+
0 → →
(Default)
appropriate exposure → under exposure → over exposure
-
+
→ 0 →
under exposure → appropriate exposure → over exposure
-
+
→ 0 →
over exposure → appropriate exposure → under exposure
5
When the setting is completed, the setting icon and
compensation value are displayed.
An image is taken one frame at a time.
Frames will be taken continuously by pressing and
holding the shutter button.
Continuous shooting begins after the specified timer
period expires.
button to open the
button while [On] is selected,
button or