Sigma FP User Manual page 104

SAVE THE CUSTOM MODE SETTING
1
Set the above settings to your desired combination.
2
SYSTEM] → [Register Custom Mode], and press the
Select [
buttons to select C1, C2, or C3. Then, press the
dialog will appear.
3
Select [Yes] with the
setting.
To cancel, select [No] and press the
CAUTION
When the new setting is saved, the previous stored setting will be

overwritten.
LOAD THE CUSTOM MODE SETTING
Press the Mode button and set to C1, C2 or C3.
If you press the AEL button on the Mode Change screen, you can

temporarily change the exposure mode.
The exposure mode can also be set by selecting [

[Exposure Settings] → [Shooting Mode].
Return to original registered setting by doing the following.
Turn the camera off (this includes the camera turning off automatically

with the Auto Power Off function)
Press the Mode button and set to another position.

104
buttons and press the
If the setting is changed in custom mode, the ● mark is
shown.
button. A confirmation
button to apply the
button.
/ SHOOT] →