Sigma FP User Manual page 142

PIXEL REFRESH
If a bright point is recorded in an image, use pixel refresh.
This optimizes shooting elements and image processing.
Close the cap, select [Yes], and press the
LCD SETTINGS
You can adjust the brightness and hue of the LCD monitor.
Brightness (LCD Brightness)
Press the
and press the
When

appropriate brightness according to the exposure data.
Hue (LCD Hue)
Adjust [Red] and [Blue] values while looking at the chart at the bottom of
the screen.
Normally set it to ±0.

POWER SAVE
LCD Off
The backlight of the LCD monitor is automatically turned off if no operations
take place for a certain period of time. Because power is turned on, all
buttons are operable. Half-pressing the shutter button starts shooting.
Auto Power Off
The camera is automatically turned off when no operations are performed
while the LCD is inactive. During Auto Power Off, buttons do not work.
Half-pressing the shutter button releases the auto power-off mode.
142
button to adjust to the brightness to the appropriate value,
button to apply the setting.
is selected, the monitor is automatically adjusted to an
button to apply the setting.