How To Clean The Product - Fluke ProSim 4 Getting Started

ProSim™ 4
Getting Started
To prevent personal injury:
•
Do not disassemble the battery.
•
Batteries contain hazardous
chemicals that can cause burns
or explode. If exposure to
chemicals occurs, clean with
water and get medical aid.
•
Do not put battery cells and
battery packs near heat or fire. Do
not put in sunlight.
•
Do not disassemble or crush
battery cells and battery packs.
To prevent possible electrical shock, fire, or
personal injury:
•
Remove the input signals before
you clean the Product.
•
Use only specified replacement
parts.
•
Have an approved technician
repair the Product.
12

How to Clean the Product

 Caution
Do not pour fluid onto the Product surface;
fluid seepage into the electrical circuitry may
cause the Product to fail.
Do not use spray cleaners on the Product;
such action may force the cleaning fluid into
the Product and damage electronic
components.
Clean the Analyzer occasionally with a damp cloth and
mild detergent. Try to prevent the entrance of liquids.
Clean the adapter cables with the same precautions.
Examine them for damage and deterioration of the
insulation. Examine the connections for integrity. Keep
the transducer adapter clean and dry.