Battery Information - Tesla MODEL X 2019 Owner's Manual

Hide thumbs Also See for MODEL X 2019:
Table of Contents

Advertisement

About the Battery
Model X has one of the most sophisticated
battery systems in the world. The most
important way to preserve the Battery is to
LEAVE YOUR VEHICLE PLUGGED IN when
you are not using it. This is particularly
important if you are not planning to drive
Model X for several weeks. When plugged in,
Model X wakes up when needed to
automatically maintain a charge level that
maximizes the lifetime of the Battery.
Note: When left idle and unplugged, your
vehicle periodically uses energy from the
Battery for system tests and recharging the
12V battery when necessary.
There is no advantage to waiting until the
Battery's level is low before charging. In fact,
the Battery performs best when charged
regularly.
Note: If you allow the Battery to discharge to
0%, other components may become damaged
or require replacement (for example, the 12V
battery). In these cases, you are responsible
for repair and/or transporting expenses.
Discharge-related expenses are not covered
by the warranty or under the Roadside
Assistance policy.
The peak charging rate of the Battery may
decrease slightly after a large number of DC
Fast Charging sessions, such as those at
Superchargers. To ensure maximum driving
range and Battery safety, the Battery charge
rate is decreased when the Battery is too cold,
when the Battery's charge is nearly full, and
when the Battery conditions change with
usage and age. These changes in the condition
of the Battery are driven by battery physics
and may increase the total Supercharging
duration by a few minutes over time.
Charging

Battery Information

Battery Care
Never allow the Battery to fully discharge.
Even when Model X is not being driven, its
Battery discharges very slowly to power the
onboard electronics. The Battery can
discharge at a rate of approximately 1% per
day, though the discharge rate may vary
depending on environmental factors (such as
cold weather), vehicle configuration, and your
selected settings on the touchscreen.
Situations can arise in which you must leave
Model X unplugged for an extended period of
time (for example, at an airport when
traveling). In these situations, keep the 1% in
mind to ensure that you leave the Battery with
a sufficient charge level. For example, over a
two week period (14 days), the Battery may
discharge by approximately 14%.
Discharging the Battery to 0% may result in
damage to vehicle components. To protect
against a complete discharge, Model X enters
a low-power consumption mode when the
displayed charge level drops to approximately
0%. In this mode, the Battery stops supporting
the onboard electronics and auxiliary 12V
battery. Once this low-power consumption
mode is active, immediately plug in Model X to
prevent a jump-start and 12V battery
replacement.
Note: If the vehicle is unresponsive and will
not unlock, open, or charge, then the 12V
battery may have become discharged. In this
situation, contact Tesla.
Temperature Limits
For better long-term performance, avoid
exposing Model X to ambient temperatures
above 60° C or below -30° C for more than 24
hours at a time.
Energy Saving Feature
Model X has an energy-saving feature that
reduces the amount of energy being
consumed by the displays when Model X is
not in use. On newer vehicles, this feature is
automated to provide an optimal level of
energy saving. However, on older vehicles, you
can control the amount of energy being
consumed by the displays by touching
Controls > Display > Energy Saving. For more
information on maximizing range and saving
energy, see
Getting Maximum Range
87.
on page
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents