Tesla MODEL X 2019 Owner's Manual page 134

Speed Limit Mode
Speed Limit Mode allows you to limit the acceleration and maximum speed – between 50 and 90
mph (80 and 145 km/h) – of your Model X. This feature is protected by a 4-digit PIN that you
create when enabling it for the first time, and which must be entered whenever you want to
disable and enable it.
If your Model X comes within approximately 3 mph (5 km/h) of the selected maximum speed, a
chime sounds and text appears on the instrument panel above the driving speed. Additionally,
your mobile app sends you a notification.
To enable Speed Limit Mode:
1. Ensure the vehicle is in Park.
2. Touch Controls > Safety & Security > Speed Limit Mode on the touchscreen or CONTROLS in
your mobile app.
3. Select the maximum driving speed that you would like to limit the vehicle to.
4. Drag the slider to the ON position.
5. Enter the 4-digit PIN that you want to use to disable and enable Speed Limit Mode.
Note: If you forget the PIN, you can disable Speed Limit Mode by entering the login credentials for
your Tesla Account.
Note: When Speed Limit Mode is enabled, the acceleration setting (Controls > Driving >
Acceleration) is automatically set to Chill (see
Warning: Driving downhill can increase driving speed, causing the vehicle to exceed your
chosen maximum speed.
Warning: Speed Limit Mode is not a replacement for good judgment, driver training, and the
need to closely monitor roadway speed limits and driving conditions. Accidents can occur at
any speed.
Erasing Personal Data
You can erase all personal data (saved addresses, music favorites, HomeLink programming, etc.)
and restore all customized settings to their factory defaults. This is useful when transferring
ownership of Model X. Touch Controls > Service > FACTORY RESET. Before erasing, Model X
verifies your credentials by prompting you to enter the user name and password associated with
your Tesla Account.
Using the Touchscreen
Acceleration Modes on page 83).
Controls
133