Ignition System - KYMCO MXU 500i 2018 Service Information

16.Electrical System
MXU 500i/700i

Ignition System

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
The ignition timing is set at the factory and is not adjustable. To troubleshoot the ignition
system, you will need a digital multimeter (Fluke model 73). Perform the following checks.
Before performing any tests make sure the electrical connections are not loose or corroded.
Also, make sure the engine has good compression, the transmission is in neutral, and the
engine kill switch is in the run position.
Make sure the battery is fully charged and the fuses are in good condition. See the Battery
and Fuses and Relays topics for more information.
Electrical Connections
Make sure all electrical connections are good. There must not be open, loose, or rusted
connections.
16-28