Editing A Rhythm Pattern Group; Saving A Rhythm Pattern Group - Roland FANTOM Series Reference Manual

Performing with Rhythm Patterns
5.
To stop, touch the icon of the rhythm pattern
that's playing, or press the [STOP] button.
MEMO
5 The length of the pattern is shown below each rhythm pattern name.
If you select a different rhythm pattern while a pattern is playing, the
pattern switches at a measure division.
5 If you play a rhythm pattern that's assigned as Intro, playback
automatically switches to Pattern A when the Intro has finished playing.
5 If you play a rhythm pattern that's assigned as Ending, the rhythm
pattern automatically stops when the Ending has finished playing.

Editing a Rhythm Pattern Group

You can edit a rhythm pattern group and freely assign rhythm
patterns to it .
1.
Press the [RHYTHM PATTERN] button.
The RHYTHM PATTERN screen appears .
2.
Use the cursor [H] [I] [K] [J] buttons to move
the cursor to one of the Intro–Ending fields.
Cursor
3.
Use the [VALUE] dial or the [INC][DEC] buttons
to select the rhythm pattern that you want to
assign.
4.
Repeat steps 2–3 to specify other rhythm
patterns.
34

Saving a Rhythm Pattern Group

The edited rhythm group is temporary, and will be lost when
you turn off the power or select another rhythm group .
If you want to keep the edited rhythm group, write it to a user
group in the FANTOM .
NOTE
When you execute the write operation, the existing data in the write-
destination is overwritten .
1.
Press the [WRITE] button.
The WRITE MENU screen appears .
2.
Touch <RHYTHM PATTERN GROUP>.
The RHYTHM PATTERN GROUP WRITE screen appears .
3.
If you want to edit the name, select [E1] RENAME.
After editing the name, select [E6] OK to close the window .
4.
Use the [VALUE] dial or the [DEC][INC] buttons
to select the write-destination.
5.
Select [E6] OK.
A confirmation message appears .
If you decide to cancel, choose [E5] CANCEL .
6.
Select [E5] OK.
The rhythm pattern group is saved .