Settings For The Entire Fantom - Roland FANTOM Series Reference Manual

Settings for the Entire FANTOM

Basic Procedure for System Settings
1.
Press the [MENU] button.
The MENU screen appears .
2.
Touch <SYSTEM>.
The SYSTEM screen appears .
Menu Explanation
[E1] knob
Scrolls up or down through the tabs .
[E2] knob
Scrolls the cursor up or down .
[E6] knob
Edits the value of the parameter selected by the cursor .
3.
Switch between the tabs in the left side of the
screen to select the desired screen.
4.
Select the desired parameter, and change its
value.
Tab Explanation
GENERAL Specifies overall settings .
KEYBOARD Specifies keyboard settings .
PEDAL Specifies pedal settings .
WHEEL 1/2 Specifies wheel settings .
S1/S2/S3 Specifies [S1], [S2], and [S3] button settings .
SLIDER
Specifies slider settings .
KNOB Specifies knob settings .
USB Specifies USB settings .
MIDI
Specifies MIDI settings .
CV/GATE Specifies CV/GATE settings .
SOUND Specifies settings related to sound .
SYNC/TEMPO
Specifies synchronization and tempo settings .
CLICK Specifies click tone settings .
NOTE PAD Specifies note pad settings .
CONTROL
Specifies settings related to control functions .
INFO Shows information about this unit .
112
Saving the System Settings
If you want to save the system settings that you changed,
execute the Save operation .
1.
In the SYSTEM screen, press the [WRITE]
button.
When the save is completed the indication "Completed"
appears .
System Parameter
Overall Settings
(GENERAL)
Parameter Value
Auto Off
OFF, 30, 240
VENDOR
USB Driver
GENERIC
File Verify
OFF, ON
Startup
Startup Scene
A001–D128
Pad Mode
(p . 74)
Time Stamp
Year/Month/Day/Hour/
–
Minute
Setting the date and time
1.
Move the cursor to the date and time fields at
the bottom of the screen.
2.
Press the [ENTER] button.
The Time Stamp window appears .
3.
Use the [E1]–[E5] knobs to specify the date
and time.
4.
Select [E6] CLOSE.
5.
After changing the date and time, save the
system settings, and then turn the power off
and on again.
Explanation
Specifies whether the unit will turn
off automatically after a certain time
has elapsed .
If you don't want the unit to turn off
automatically, choose "OFF" setting .
The dedicated USB driver is used .
The generic driver provided by the
operating system is used .
Verifies the correctness of the file
when copying or backing-up . This
provides higher reliability, but
requires more time to execute .
Selects the scene that is loaded when
the power is turned on .
Specifies the pad mode when the
power is turned on .
The date and time that you specify
here is used as the timestamp for files
created by the FANTOM .