Switching Zone Mute - Roland FANTOM Series Reference Manual

Assigning Convenient Functions to the Pads (PAD MODE)

Switching Zone Mute

You can use the pads to mute (silence) the Zones (1–16).
Pressing a pad switches the mute status of each zone.
The pad is muted in the "On" state.
MEMO
5 You can mute multiple zones simultaneously.
5 The pad number corresponds to the zone number.
5 This is the same function as "mute" in the MIXER screen.
Switching Zone Solo
You can use the pads to solo a zone (so that only the selected
zone is heard).
The zone that you select by pressing the pad is soloed.
Press a soloed pad once again to defeat solo.
MEMO
5 You can't solo multiple zones.
5 The pad number corresponds to the zone number.
5 This is the same function as "solo" in the MIXER screen.
76
(Zone Mute)
(Zone Solo)
Turning the Keyboard Switch Group
On/Off
(Kbd Sw Group)
You can use the pads to switch between pre-assigned keyboard
switch groups.
MEMO
Kbd Sw Group (keyboard switch group) lets you handle a combination of
the on/off status for each zone's ZONE INT/EXT button as one of 16 keyboard
switch groups. By switching groups, you can instantly switch between
different sounds played from the keyboard using multiple zones, while
leaving the scene itself unchanged.
Press a pad to select a group. In the screen of settings, each
group's icon shows the on/off status of each zone.
Editing the status of each group
For each of the 16 keyboard switch groups, you can individually
edit the combination of ZONE INT/EXT button on/off states.
1.
In the KBD SW GRP SELECT screen, select the
group that you want to edit.
2.
Select [E1] EDIT.
The [BANK] is lit, and the KBD SW GRP EDIT screen appears.
In this example, we are editing the state of each zone for GROUP
2.
3.
To turn each zone's ZONE INT/EXT button on/
off, touch an icon in the screen or press a pad.
4.
When you have finished making settings,
select [E6] EXIT to return to the KBD SW GRP
SELECT screen.
5.
If you want to make settings for another
group, repeat steps 1–4.
MEMO
5 Even when a screen other than the KBD SW GRP EDIT screen or the KBD
SW GRP SELECT screen is shown, pressing the [BANK] button to make it
light will make the pads illuminate to indicate the setting of each zone
in the currently selected keyboard switch group. You can press the pads
to change their status. Pad numbers correspond to zone numbers.
5 Keyboard switch group settings are saved in the scene. If you want to
save the settings, save the scene (p. 44).