Making Zone Eq Settings In The Mixer Screen - Roland FANTOM Series Reference Manual

Making ZONE EQ Settings in the MIXER
Screen
A simplified EQ curve is shown in the ZONE EQ area, and from
here you can access an edit screen and edit the ZONE EQ
settings .
1.
In the MIXER screen, touch the ZONE EQ field
of the zone whose EQ you want to edit.
The ZONE EQ screen appears .
EQ on/off
2.
Edit the parameters as necessary.
Parameter Value
<EQ> OFF, ON
[E1] knob –
[E2]–[E4] knob
–
Input Gain [E5] knob -24–+24dB
[E6] CLOSE
–
MEMO
For details on the ZONE EQ parameters, refer to "Parameter Guide"
(PDF).
Cursor
Explanation
Turns the ZONE EQ on/off .
Moves the cursor up/down .
Edit the corresponding
parameters depending on the
cursor position . For the example
shown in the illustration above,
[E2] corresponds to LOW Gain,
[E3] to MID Gain, and [E4] to
HIGH Gain respectively .
Specifies the input gain .
Closes the screen .
Using the Mixer Screen
59