Advertisement
Setting summer time
Checking the summer time setting
1.
Pull the crown out to position 1 .
The second hand points to 30 seconds and stops.
2.
Rotate the crown to move the mode hand to point [TME].
3.
Push the crown in to position 0 .
4.
Press and release the upper right button B .
The second hand indicates the current time zone setting and the function
hand indicates the current summer time setting.
SMT ON
ON
SMT
SMT OFF
ON
OFF
ON
SMT
SMT
5.
Press and release the upper right button B to finish the
procedure.
The hands returns to normal.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Changing the summer time setting
1.
Pull the crown out to position 1 .
2.
Rotate the crown to move the mode hand to point [TME].
3.
Pull the crown out to position 2 .
The second hand indicates the current time zone setting and the function
hand indicates the current summer time setting.
4.
Rotate the crown to choose a time zone where you want to
change the summer time setting.
The time zone changes and the hour and minute hands start moving. The
summer time setting of the chosen time zone is indicated.
5.
Press and release the upper right button B while the hands
stop.
• Summer time is indicated.
• Automatic switching of the summer time setting is
SMT ON
activated.
corresponding to reception of summer time signals.
• The standard time is indicated.
• Automatic switching of the summer time setting is
SMT OFF
deactivated. Summer time is not indicated even after
reception of summer time signals.
• Each time you press button B , the summer time setting of the chosen time
zone changes alternately.
• In the following groups of areas, the summer time setting of all areas in a
group is automatically changed when summer time signals are received in
an area of the group.
USA: ANC, LAX, DEN, CHI, NYC
Germany: LON, PAR, ATH, PDL
However, he link does not work for areas where the automatic switching is
turned off.
6.
Repeat steps 4 and 5 to execute the summer time settings of
other time zones.
7.
Push the crown in to position 0 to finish the procedure.
Summer time is indicated.
OFF
ON
OFF
SMT
Standard time is indicated.
OFF
The summer time setting is automatically changed
Adjusting the time and calendar manually
1.
Pull the crown out to position 1 .
2.
Rotate the crown to move the mode hand to point [SET].
3.
Pull the crown out to position 2 .
The second hand points to 0 seconds and stops.
4.
Press and release the lower right button A .
The hour and minute hands slightly move and time and calendar become
adjustable.
5.
Press and release the lower right button A repeatedly to
change the hand/indication to be corrected.
• Each time you press button A , the target changes as follows:
Hour/minute/24-hour → date → year/month → day of week → (back to the
top)
• The hand or indication slightly moves when selected to show it becomes
adjustable.
6.
Rotate the crown to adjust the hand/indication.
• The hour, minute and 24-hour hands move synchronously.
• Check whether the time set is AM or PM with the 24-hour hand.
• Date indication changes to the next as the function hand rotates 5 times.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
• Year and month are indicated with the second hand.
"Month" corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
12
11
1
10
2
9
3
8
4
7
5
6
7.
Repeat steps 5 and 6.
8.
Push the crown in to position 0 in accordance with a reliable
time source.
9.
Change the mode to [TME] to finish the procedure.
E660 Abbreviated instruction
The year corresponds to the
years since leap year and is
indicated with the position of the
second hand.
Years since leap year: 0 (Leap
year)
Years since leap year: 1
Years since leap year 2
Years since leap year: 3
0
1
2
3
Advertisement
