Advertisement
Checking the current world time setting
1.
Pull the crown out to position 1 .
The second hand points to 30 seconds and stops.
2.
Rotate the crown to move the mode hand to point [TME].
3.
Push the crown in to position 0 .
4.
Press and release the upper right button B .
The second hand indicates the current time zone setting and the function
hand indicates the current summer time setting.
5.
Press and release the upper right button B to finish the
procedure.
The hands returns to normal.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Setting the world time
This watch can indicate the time around the world according to which of 24 time
zones (offsets from UTC — Coordinated Universal Time) is chosen.
1.
Pull the crown out to position 1 .
2.
Rotate the crown to move the mode hand to point [TME].
3.
Pull the crown out to position 2 .
The second hand indicates the current time zone setting and the function
hand indicates the current summer time setting.
4.
Rotate the crown to select an area.
The hour and minute hands start moving as you finished to select an area.
• Pressing button B while the hands stops changes the summer time setting.
5.
Push the crown in to position 0 to finish the procedure.
Table of time zones and representative places
• Countries or regions may change time zones for various reasons.
• When using the watch in an area not listed in the table, select an area name in
the same time zone.
Second
Time zone
Area name
hand
0
LON
0s
+1
PAR
3
+2
ATH
5
+3
RUH
8
+4
DXB
10
+5
KHI
13
+6
DAC
15
+7
BKK
17
+8
BJS
20
+9
TYO
22
+10
SYD
25
+11
NOU
27
+12
AKL
30
-11
MDY
33
-10
HNL
35
-9
ANC
38
–8
LAX
40
-7
DEN
43
–6
CHI
45
–5
NYC
47
–4
MAO
50
-3
RIO
52
-2
FEN
55
-1
PDL
57
• The offsets in the table are based on the standard time.
• The areas whose "Signal station" has ◆ mark in the table are out of reception
range and cannot receive its signals.
• For an area with * or **, automatic change of summer time setting are linked.
For details, see "Setting summer time".
Representative area
London*
Germany
Paris*
Athens*
Riyadh
◆Germany
Dubai
Karachi
Dhaka
◆China
Bangkok
Beijing /Hong Kong
China
Tokyo
Japan
Sydney
Noumea
◆Japan
Auckland
Midway
Honolulu
◆USA
Anchorage**
Los Angeles**
Denver**
USA
Chicago**
New York**
Manaus
◆USA
Rio de Janeiro
Fernando de Noronha
◆Germany
Azores*
Receiving the signal manually (on-demand reception)
• It may take 2 - 15 minutes to receive time signals.
1.
Pull the crown out to position 1 .
The second hand points to 30 seconds and stops.
2.
Rotate the crown to move the mode hand to point [TME].
3.
Push the crown in to position 0 .
4.
Press and hold the lower right button A for 2 seconds or more
until the second hand points "RX".
The second hand point to "RX" after indicating the previous reception result
and signal reception starts.
5.
Put the watch in the place with good conditions for time signal
reception.
• Do not move the watch as far as possible while the second hand points
"RX".
• Pressing button A while the second hand points "RX" cancels signal
reception and the watch returns to normal indication.
After the reception finished, the reception result (OK/NO) is indicated and
the watch returns to normal indication.
Signal station
E660 Abbreviated instruction
Advertisement
