SECOLink KM24 Short User Manual page 6

Intruder alarm system
Trouble memory
The keypad has an option to inform a user about system troubles, which can also be seen by a green flashing
It will not show trouble memory by default and if it is necessary to view it, follow the steps described below:
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
Hide troubles
To arm the system in a usual way is impossible when the
the system. The keypad will hide the trouble and the
it will be possible to arm the system in a usual way. To permanently hide system trouble and to avoid previously
described arming procedure, it is recommended to change settings in the menu as described below:
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
PIN length
PIN
User has an option to choose the length of the PIN code. The following options are available: Fixed 4 digits, Fixed 5
digits, Fixed 7 digits, and Not fixed. The keypad automatically presses the
code is entered. The user must press the
changed in the menu as follows:
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
LCD display brightness and contrast
The brightness and contrast of LCD display can be modified to correspond to premises lighting conditions and user
needs. These settings can be modified in the menu as follows:
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
Backlight modes of LCD display and keypad keys
Various settings of LCD screen and keypad backlight allow the user to customize the illumination to match different
environments. For example, LCD backlight can be turned on at all times in places where it is necessary to always
see the status of the system, or the keypad can be illuminated after any key is pressed or zone is being violated. Available
settings of LCD display and keypad backlight are as follows: Always – backlight is always ON; By zone - backlight is turned
ON, when at least one of the following events occurs: an entry/exit delay is in progress; an alarm is triggered; either a Chime
zone or a zone marked with "+" sign in the "Events from zones" list is violated; and any of the keypad keys is pressed.
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
Status LEDs
Colored backlight of
match different situations. Available settings: Off; Always – status LEDs are always visible; By zone – status LEDs
are visible when at least one of the following events occur: an entry/exit delay is in progress; an alarm is triggered; either a
"chime" zone or a zone marked by "+" sign in the Events from zones list is violated; or any keypad key is being pressed.
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
key LED
Backlight of the
settings: Off - the
be armed; Armed - the
is steady On when the system is armed. When the system is ready to be armed, the
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
key LED
Backlight of the
LED is allways Off; Prompt – the
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
key LED
B B B B B B B B ! ! ! ! ! ! ! !
BY BY BY BY BY BY BY BY
!
Backlight of the
LED is allways Off; Not Ready – the
LED is ON when there are bypassed zones.
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
Page 6
, Keypad Settings
Keypad Settings , Interface Settings
ENT ENT ENT ENT
key after the last not fixed PIN code digit is entered. PIN code length can be
ENT ENT ENT ENT
Keypad Settings , Interface Settings
ENT ENT ENT ENT
Keypad Settings ,
ENT ENT ENT ENT
Keypad Settings ,
ENT ENT ENT ENT
Keypad Settings , Light & Indication
ENT ENT ENT ENT
Keypad Settings , Light & Indication
ENT ENT ENT ENT
, , , and keypad keys represents system status or prompts and can be customized to
B B B B B B B B ! ! ! ! ! ! ! !
BY BY BY BY BY BY BY BY
Keypad Settings , Light & Indication
ENT ENT ENT ENT
key can be customized to match different environments or situations that occur. Available
key Green LED is always Off; Prompt - the
key Green LED is steady On when the system is armed; Armed and Prompt – the
Keypad Settings , Light & Indication
ENT ENT ENT ENT
key can be customized to match different situations that occur. Available settings: Off - the
key LED blinks when the system is armed and is ready to be disarmed.
Keypad Settings , Light & Indication
ENT ENT ENT ENT
key can be customized to match different situations that occur. Available settings:Off – the
B B B B B B B B ! ! ! ! ! ! ! !
BY BY BY BY BY BY BY BY
key LED blinks, if there are violated zones; Zone Bypass Status – the
B B B B B B B B ! ! ! ! ! ! ! !
BY BY BY BY BY BY BY BY
Keypad Settings , Light & Indication
ENT ENT ENT ENT
, Interface Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
key is steady green. The user must press
CLR CLR CLR CLR
key will start to blink rapidly. Within 30 seconds allocated time
CLR CLR CLR CLR
, , ... , Hide Troubles
ENT ENT ENT ENT
, , ...
ENT ENT ENT ENT
Light & Indication , ,
ENT ENT ENT ENT
Light & Indication , ,
ENT ENT ENT ENT
, , LCD Backlight
ENT ENT ENT ENT
, , Keypad backlight
ENT ENT ENT ENT
, ,
ENT ENT ENT ENT
key Green LED blinks when the system is ready to
, ,
ENT ENT ENT ENT
, ,
ENT ENT ENT ENT
, ,
ENT ENT ENT ENT
KM24, KM24A, KM24G keypad KM24, KM24A, KM24G keypad
, ... Use Trouble memory
, ,
ENT ENT ENT ENT ENT ENT ENT ENT
key after the last digit of the fixed PIN
ENT ENT ENT ENT
PIN Length , , .
ENT ENT ENT ENT ENT ENT ENT ENT
... LCD brightness,
ENT ENT ENT ENT
... Contrast,
ENT ENT ENT ENT
, , .
ENT ENT ENT ENT ENT ENT ENT ENT
, ,
ENT ENT ENT ENT ENT ENT ENT ENT
Status LEDs , , .
ENT ENT ENT ENT ENT ENT ENT ENT
key LED blinks.
[ ] key LED , ,
ENT ENT ENT ENT ENT ENT ENT ENT
[ ] key LED , ,
ENT ENT ENT ENT
[B] key LED ,
ENT ENT ENT ENT
Short user manual
key.
CLR CLR CLR CLR
, , .
ENT ENT ENT ENT ENT ENT ENT ENT
twice to arm
CLR CLR CLR CLR
.
, .
ENT ENT ENT ENT
, .
ENT ENT ENT ENT
.
key Green LED
.
key
.
ENT ENT ENT ENT
key
B B B B B B B B ! ! ! ! ! ! ! !
BY BY BY BY BY BY BY BY
key
B B B B B B B B ! ! ! ! ! ! ! !
BY BY BY BY BY BY BY BY
, .
ENT ENT ENT ENT