SECOLink KM24 Short User Manual page 5

Intruder alarm system
is not recommended to use PIN codes that contain two or more same digits (e.g. 1111 or 1212) or consist of consecutive digits
(e.g. 3456). The keypad will inform the user that the PIN code change is necessary, if the PIN code is known/reconized to
other user. Using an invalid PIN code three times may: trigger an alarm and block the keypad for 90 seconds.
Review all activated users
It is recommended to review how many users can control the system after an installation. To view activated users:
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
LCD screen will display a user's number (e.g., U01) and status (e.g., Enabled or Disabled). All users with an
Enabled status can control the system or its partitions (areas).
Chime mode
This feature can be used only while the intruder alarm system is disarmed. Your system can be set to alert you by
sound or lighting of the LCD display and keys when doors or windows are being opened, or during any violation of
the selected zone. To select which zone will feature a Chime function press the
then be marked by . Press the
please do the following:
, , Chime
ENT ENT ENT ENT
Date and time settings
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
Date Format
Two different date formats are available in the system: Year-Month-Day (YYYY-MM-DD) or Day/Month/Year
(DD/MM/YYYY). To change date format:
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
Show Date and Time
Date and Time can be hidden if it is not needed to be displayed on keypad's LCD screen. This can be achieved by:
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
Prompts to change date and time
The keypad will automatically show prompts to change date and time after each system power up. This prompt can
be disabled via the menu if it is not needed.
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
Character Set
Latin
Cyrillic
Different language character sets allow the user to enter a partition, module, user or zone names using those
Greek
characters. This can be achieved by:
Baltic
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
European
Show status icons
The keypad has an icon set to represent a different status in each partition. Available icons:
– partition is armed in Stay mode;
– partition is armed in Night mode;
– partition is armed in Max Away mode;
The keypad shows status icons by default. This setting can be changed in the menu as follows:
, Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
Show temperature (KM24A, KM24G)
KM24A and KM24G keypads have a temperature sensor that shows on screen the value of measured temperature
by default. This setting can be changed in the menu as follows:
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
Correction of temperature displayed on the keypad (KM24A, KM24G)
If the keypad shows an incorrect environment temperature it is recommended to make temperature corrections. It
can be done by entering a value of the temperature measured with domestic thermometers. The correction can be
made in the menu as follows:
, Settings
ENT ENT ENT ENT ENT ENT ENT ENT
, Users , Edit Users
ENT ENT ENT ENT
key to change Chime melody (symbols , could appear). To enable this function
, ... or and ,
9 9 9 9
0 0 0 0 # # # #
WXYZ WXYZ WXYZ WXYZ
, Date and Time , , (enter date and time),
ENT ENT ENT ENT
, Keypad Settings
, Keypad Settings
, Keypad Settings
, Keypad Settings
Keypad Settings , Interface Settings
ENT ENT ENT ENT
, Keypad Settings
, Temperature , Correction
ENT ENT ENT ENT
, , ... .
ENT ENT ENT ENT
.
ENT ENT ENT ENT
.
ENT ENT ENT ENT
, Interface Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
, Interface Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
, Interface Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
, Interface Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
– partition is armed in Away mode;
– Pre-Alarm mode is turned On;
– partition is disarmed";
, ,
ENT ENT ENT ENT
, Interface Settings ,
ENT ENT ENT ENT ENT ENT ENT ENT
, , (enter temperature value),
ENT ENT ENT ENT
KM24, KM24A, KM24G keypad KM24, KM24A, KM24G keypad
key on a selected zone which will
# # # #
, Date Format ,
ENT ENT ENT ENT
, Show Date&Time
, Prompt Change Time
, Character Set , ,
ENT ENT ENT ENT ENT ENT ENT ENT
– zone is violated.
Show Status Icons ,
ENT ENT ENT ENT
, Show Temperature
.
ENT ENT ENT ENT
Short user manual
.
ENT ENT ENT ENT
, , .
ENT ENT ENT ENT ENT ENT ENT ENT
, , .
ENT ENT ENT ENT ENT ENT ENT ENT
.
, .
ENT ENT ENT ENT
, , .
ENT ENT ENT ENT ENT ENT ENT ENT
Page 5