Check The Backup And Repair Media - Omron NY Series Operating Manual

7-1-5

Check the Backup and Repair Media

Use the following procedure to check the backup or repair media.
Check the Backup Information on the Rescue Disk
Use the following procedure to check the rescue disk for the system backup.
1
Use the rescue disk to boot the IPC.
Refer to Restore a System Backup with the Rescue Disk on page 7-21 for details.
Follow the first few steps of the procedure until following screen appears:
2
Select Backup Information and then Enter.
Following screen will appear:
Lorem ipsum dolor sit amet,
Backup created on Fri Dec
Model name
consecBackuBackup created on $(cat
Serial number
Lot number
Content
${DATE_OF_BACKUP_FILE}).
Unit version
OSB version
Comment by user : demo for manual - your content will be different
Current System:
Model name
Serial number
Lot number
Unit version
OSB version
OK
3
Check the content. If there is no content then there is no usable backup on this Rescue Disk.
4
Select Exit.
The rescue disk information is checked.
Check the Custom Backup Storage Device (Windows)
Use the following procedure to check the custom backup storage device.
1
Insert the storage device with the backup in the Industrial PC that created the backup.
2
Follow the first few steps of the restore procedure to display the 'Restore files' screen.
Refer to Restore a Custom Backup with Windows on page 7-23 for details.
3
Browse the storage device and ensure at least one backup is displayed.
4
Select Cancel to cancel the restore procedure.
The storage device with the custom backup is approved.
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
1 12:34:56
: NY512-1300
: 0123
: 01234N
: MBR, Boot, Windows and Machine Control partitions
: V1.16.00
: 0000.0016
: NY
: 0123
: 01234N
: V1.16.00
: 0000.0016
7 Maintenance
7
7-17