Industrial Monitor Utility; Industrial Monitor Utility Overview - Omron NY Series Operating Manual

3-4

Industrial Monitor Utility

This section provides an overview of the Industrial Monitor Utility.
3-4-1

Industrial Monitor Utility Overview

The Industrial Monitor Utility provides a user interface to control settings and display details of con-
nected Industrial Monitors.
A
Item Description
A Connected Monitors
B Product Information
C Version Information
D Monitor Settings
E Backlight Brightness Ad-
*2
justment
F Logo Brightness Adjust-
ment
G Status Brightness Adjust-
ment
H Touch Input Settings
I Advanced Settings
J Standard windows but-
tons
*1. The Industrial Monitor Utility scans the connected USB devices and shows a list of connected monitors. If an
Industrial Monitor is not connected with the USB cable, it will not be found.
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
B
C
D
E
F
G
H
I
J
Shows a list of the connected Industrial Monitors.
Monitor in the list to display the Monitor Details. When selected the LED In-
dicators of the selected monitor will flash during 3 seconds.
Provides details of the selected Industrial Monitor.
Refer to Product Information on page 3-12 for details.
Provides version details of Industrial Monitor Utility software and firmware
details of the connected monitor.
Refer to Version Information on page 3-12 for details.
Provides several setting adjustments to control the operation of the selected
Industrial Monitor.
Use the slider to control the brightness of the selected Industrial Monitor.
Use the slider to control the brightness of the Logo LED.
Use the slider to control the brightness of the Status LED Indicator on the
monitor.
Provides details about the touch settings.
Refer to Touch Input Settings on page 3-13 for details.
Provides access to defaults and relevant Windows settings.
Refer to Advanced Settings on page 3-14 for details.
•
OK button. Applies changes and closes the window
•
Cancel button. Exits the utility
•
Apply button. Applies the changes,
3 Software
Details
*1
Select one Industrial
3
3-11