Omron NY Series Operating Manual page 103

Restore a System Backup with the Rescue Disk
A Rescue Disk is a disk with the Rescue Disk Utility; this is the software that performs the backup and
restore procedures.
Use the Rescue Disk to restore the system backup. This will restore the Windows partition, the boot
partition and the MBR to the moment the Rescue Disk backup was created.
Precautions for Correct Use
The backup data of the Rescue Disk can be used to recover the data of the IPC that created
that backup. It can also restore data to another IPC if the product configuration is identical to
the IPC that created the backup.
Additional Information
To restore a system backup, a Rescue Disk with a system backup should be available.
• Refer to Create a New Rescue Disk with the Rescue Disk Creator on page 7-6 for Rescue
Disk creation details.
• Refer to Create a System Backup with the Rescue Disk on page 7-5 for system backup de-
tails.
• Refer to Messages Using the Rescue Disk on page 3-23 for Rescue Disk error messages.
To restore a system backup:
1
Ensure the IPC is powered OFF.
2
Ensure a keyboard is connected to the IPC.
3
Connect the Rescue Disk to a USB connector of the IPC.
4
Power ON the IPC while pressing the F11 key twice per second.
The option to select your boot device will appear.
Your Rescue Disk will be displayed in this boot menu with the manufacturer data of your USB
device.
If your boot device is not visible in this list:
1) Disconnect the USB connector of the Rescue Disk.
2) Re-insert the USB connector of the Rescue Disk.
3) Select Ctrl, Alt and Delete to reboot the IPC.
4) Press the F11 key twice per second.
NY-series Industrial PC Operating Systems and Software Utilities Manual (W616)
7 Maintenance
7
7-21