Step 2: Unpacking The System And Identifying The Parts - Digital Equipment MicroVAX 3100 Model 85 Installation Information

Step 2: Unpacking the System and Identifying the Parts

1. Unpack the system.
2. Make sure that you have all the parts listed on the packing slip. The
following loose-piece accessory kit is shipped with all basic systems. If you do
not have all the parts listed, contact your Digital Sales representative.
3
6
System Unit
DEC423 Terminal Cable (BC16E-25)
One ThinWire™ Ethernet T-Connector (H8223) and Two Terminators (H8225)
Standard Ethernet Loopback Connector (12-22196-01)
RS232 to DEC423 Adapter (H8575-A)
Power Cord
Documentation and Software Licenses
1–2 Installation Procedure
1 2
4 5
7
RE_EN06058A_91