System Defaults - Notifier AFP-300 Programming Manual

2. Program Change
Note: For details on
programming special zones
F0-F9 and R0-R9, refer to
"Special Zone Change" on page
16. For details on programming
system parameters, Refer to
"System Function
Programming" on page 18.
8
www.PDF-Zoo.com

System Defaults

Autoprogram selects the following default system functions the first time you program
the control panel. System defaults do not appear on the display. Subsequent
Autoprogramming will not change previous editing of these functions.
Table 9 contains a list of the default functions and values:
Function
Zone 00
Zones 01 through 89
F0
R0-R9
ABORT=ULI; CROSS=N;
SOAK=0000; Delay=00
F5 and F6
F7
F8
F9
System Parameters (see Figure 28 on
page 18)
Passwords
All Systems Normal
Custom Message
Value
Custom label=General Alarm Zone
Custom label is blank
Label=Presignal/PAS Delay; Delay=180; PAS=N
Label=Release Funct Release Control
N/A
Label=Time Function Time Control
Off=00:00; Days=SMTWTFSH
Label=Holiday Funct; all days are 00/00
Label=Code Type=March Time
Label=Pre-Alarm Funct
Default=Alert
SIL INH=000
AUTO=000
VERIFY=30
USA TIME
TERM_SUPERV=NO
LocT
BLINK=Y
ST=4
ACS=N
Program Change=00000, Status Change=11111
N/A
40 blanks
Table 9 System Defaults
AFP-300/AFP-400 Programming PN 50259:C1 06/19/97
System Defaults